Summary

I decided to add the new (at this time) Prusa i3 bed to my older Prusa i1. In order to do that, I needed an end stop that was recessed a tad. The endstop as shown here extends the switch out 31mm from the center of it's attached rod.

This is designed to mount to an M8 threaded rod and use an M4 screw for the clamp.

The switch mounting hole is slotted to allow you to move it up and down which should accommodate many different arm types.

Print Settings

Printer Brand:

RepRap

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Prusa Mendel</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printed using orange Octave ABS.</p></div>

Extended Endstop

Extended Endstop

Related Models