December 5, 2015
Description
This is my Take on the Crozius Arcanum from WH40k for a Space Marine Chaplin
This is sized to use a 3" PVC pipe for the handle. And the Top will need to be
Cut in order to print on most beds and then fuse welded together....
There is a 10mm cylinder on the top connector which should slide into the socket on the top...
The skull bottom can either add the collar object and welded or glued to the bottom of the PVC pipe . Additional Items you may wish to print will be a purity seal to add to the rod.
License:
Creative Commons - Attribution - Non-Commercial
celticht32
