Ciclop 3D Scanner Raspberry Pi Version

These parts are my take on the Ciclop 3D Scanner with a Raspberry Pi control board (Piclop).

I have modified the parts as little as possible so the machine looks very close to an original Ciclop. The main changes are the Raspberry Pi mounting points and adding 8mm feet to the bottom to fit a longer stepper than was originally intended. I have also taken the radius off the front edge because it makes the part harder to print for no good reason.

UPDATE 08-01-2016
I retract my previous statement. Adjustment of the camera is required, its just way too hard to get it straight. New files now uploaded with camera adjustment!