Box Mod Dual 18650 & Mosftet (Cloud Chasing)

The dimensions of this box mod are: 56x25x88 mm.

A suggestion: print it with ABS because PLA do not resist for this kind of usage.

To mount the box mod u need:

• 10 magnets 3x1 mm;
• 1 ON/OFF switch (http://fave.co/2boIKAN);
• a 12 mm push button;
• a mosftet IRLB3034 (http://fave.co/2bsiYPl)
• battery contact (whatever u want, there 74 mm of space for the battery) (Keystone 5209 > http://fave.co/2bskiBT)

For the wiring i used the scheme that u can see in the shots.
This box mod is for two 18650 in serie (not parallel).
Under the mosfet i placed a little piece of cork to avoid direct contact with the plastic.

U can choose with:

• two different connector hole (10 and 12 mm);
• two different door: with or without direct access to the on-off switch.

Remember, for YOUR SAFETY, to put off the box mod when u don'use it.

Good luck.

The box mod in the shot is printed with a Zortrax M200 at 140 microns.