Flexible Koni Shock Adjuster Joint

This is an adapter which fits on top of Koni Yellows and allows you to adjust the rebound settings. The adapter has a u-joint built into it which allows it to swivel.

I needed this for adjusting the Konis on the rear of my Subaru WRX.

What you'll need

• A car with Koni Shocks which have the little tab on top for adjustment.
• 1/4" Steel rod, cut it to length, thread it on one end and put some knobs on it, file a flat section on the steel rod.
• Two small set screws

Printer settings

• 100% density
• Print supports 2mm apart

Notes

It seems to work pretty well :)