Raspberry Pi Glass | Wearable Computer

This is a project I build for the first Maker Faire in Germany (in Hannover):

The Raspberry Pi Glass (or wearable Raspberry Pi)

Most of the project is printable with a 3D printer, I used gold colored PLA to get a retro futuristic look.

In addition to the printable parts you will need:

• A Raspberry Pi ;-)
• SainSmart 1.8 ST7735R TFT LCD Module: http://bit.ly/sainsmartdisplay
• The kernel module for this display: http://www.whence.com/rpi/
• 2 small plastic or glass lenses
• Small Bluetooth keyboard: http://www.ebay.de/itm/111079678580
• Bluetooth dongle: http://www.ebay.de/itm/290762845726
• USB Powerbank: http://bit.ly/powergenusb
• ~40 brass screws M3x20 (some has to be shortened)
• 1 brass screw M3x30
• 2 brass screws M4x20
• ~50 brass nuts M3
• 4 brass nuts M4
• 2 self tapping screws (must fit through the holes of the Raspberry Pi)
• Artificial or real leather
• A cheap wristwatch
• Acrylic glass (fluorescent for a nicer look)
• 2 5mm UV LEDs and two matching resistors
• A small switch

You will also need some small parts like rivets, cables, USB plugs etc.