You Captured My Heart

**Suggested use: **

1. Print the STL file with no raft, no support.
2. Pause the printer when the print is 75% complete, remove the heart box top and bottom pieces only. Paint the heart box red or decorate with colored markers as desired.
3. Insert a handwritten message and/or small jewelry item into the heart box, then drop the assembled heart box into the outer box and unpause the print, to "capture the heart."
4. When printing is complete, tie a a loop of red ribbon through the small holes in the corner of the outer box for decorative effect.

Notes:
a. If you have a printer with dual extruders, print the heart box in red.
b. If you are planning to insert a ring into the heart box, be sure to resize the print so that the ring will fit through the holes in the outer box. :-)
c. The outer box also makes a good coin trap.
d. The sample messages shown in the PNG files were generated with http://cooltext.com/

Jan. 30, 2017 Update: heart_box_v2 prints amazingly fast, with much better quality. I've removed the v1 files.