Summary

It is a vertical foregrip designed to attach to a picatinny rail. I designed it as a shorty, so only 3 fingers will fit on it if you have average sized hands. An 8-32 x 1.25" SHCS and 8-32 hex nut are required to tighten it to the rail for mounting. PLA will work fine on an airsoft, but use ABS if it is going on a rifle and scale it 105% to account for the ABS shrinking.

Print Settings

Printer Brand:

SeeMeCNC

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Rostock MAX</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.3mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50%+</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I used .3mm layer heights so the grip would have a little bit more texture to it.  Print with the base against the print bed with the bolt hole at the top.</p></div>

Shorty Veritical Foregrip

Shorty Veritical Foregrip

Related Models