Summary

Male XT60 connector mount for Blackout Mini H quadcopter. Slides onto two rear 35mm spacers to accept female XT60 from LiPo. Hex spacer sockets are 6.1mm to allow for print swell. Pocket for XT60 will be a tight fit as designed - you will likely need to sand the sides of the connector housing to get it to fit snugly. Some manufacturers' connectors fit tighter than others. A bit of CA can be used to secure it. This design puts the solder lugs for the connector directly above the frame PDB LiPo pads.

Print Settings

Printer:

FlashForge Creator Pro

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.1</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%</p></div></p>

Post-Printing

                <p class="detail-image"><img src="https://thingiverse-production-new.s3.amazonaws.com/assets/48/e9/4d/a6/45/image1.JPG"></p>

How I Designed This

Designed using VariCAD
www.varicad.com

Blackout Mini H XT60 Mount

Blackout Mini H XT60 Mount

Related Models