Summary

An iPhone 5c case with the Dota 2 logo on the back. Can be printed with dual extruders, but I just printed the two separately. My original plan was to just print in red and spray paint black afterwords, but after seeing rodabollo's design, I thought that this would be a better approach. Make sure that your printer's dimensional tolerances are good, I really had to sand mine down to fit.

Print Settings

Printer:

Da Vinci 1.0

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%-15%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed with thick shells because I wanted the case to last. And if you print with ABS like I did, I would recommend resizing everything by 1% to account for shrinkage.</p></div>

Post-Printing

Optional

            <div><p>I printed with ABS, so I used acetone to adhere the logo to the back as well as smooth it out. You may have to sand away in order to get a proper fit.</p></div>

Dota 2 iPhone 5c Case

Dota 2 iPhone 5c Case

Related Models