Test your 3D printer! v3

more Tests in the new **Test your 3D printer! version 3**. **new features** - Z-Height Check - Warp Check - Spike - Hole in wall - Raft Test - more Overhang Steps 50° - 70° (needs special care, like cooling) - 2 different extrusion widths: 0.48mm & 0.4mm This is a hard to print testfile! often you don't know if your printer is ready for complex files. with this file you have an easy option to check problematic printing/slicing stuff. does your printer challenge this ultimative part? check it out and get (almost) instant results. these test are included in this very tiny file: - 01 Nut, Size M4 Nut should fit perfectly - 02 Wave, rounded print - 03 Star, Sharp Edges - 04 Name, Complex Shapes - 05 Holes, Size 3, 4, 5 mm - 06 minimal Distance: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7 mm - 07 Z height: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1 mm - 08 Wall Thickness: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7 mm - 09 Bridge Print: 2, 4, 8, 16 mm - 10 Sphere, Rounded Print 4.8mm height - 11 Sphere Mix, 7 mm height - 12 Pyramide, 7 mm height - 13 Overhang: 25, 30, 35, 40, 45, 50, 55, 60, 65, 70° - 14 Warp, does it bend? - 15 3D Print Font, optimized for 3D printing - 16 Surface, Flatness - 17 Size, 100 x 100mm x 23.83 (10mm width) - 18 Spike, minimum Layer Time, 21 mm height from Bottom (include Baseplate) - 19 Hole in Wall, 4 mm diameter, check for proper print - 20 Raft Test, raft should be just under the model - 21 Retract Travel, check retract settings for longer travel version 1 http://www.thingiverse.com/thing:704409 version 2 http://www.thingiverse.com/thing:1019228