Dual Color Nudibranch

Dual extrudable Nudibranch slug.

This model is split in half for easier supported printing. Be sure to turn on supports to help print the eyes and some parts of the fins. Very minimal support required. Once printed you will need to glue the two halves together. I recommend SciGrip Weld-On 4 acrylic cement.

There are 4 models. 2 left sides one for each extruder, and 2 right sides one for each extruder. Just be sure you have your extruders assigned correctly! Assign Extuder 1 to Left EXT 1 and Right EXT 1. Extruder 2 assigned to Left EXT 2 and right EXT 2.

This is a remix. If you want single color, see the original model I uploaded!