Assassins Teapot

Video of it in action:
https://youtu.be/uf9LsS3NbXw

This is an Assassins Teapot, inspired by the product shown by Tim on Grand Illusions:
https://www.youtube.com/watch?v=kkrgUT70Mbo

You can put two liquids in the teapot. As you pour, control which liquid comes out by putting your thumb over one of the two holes. Serve yourself tea and your friend something stronger.

I designed this with printability in mind. So just use standard settings, no supports and you should be good.

Made in OnShape:
https://cad.onshape.com/documents/7ccf410d5ad2ec76ff55f6bf/w/bdbf0af5639687a4096f1c07/e/95ad66999bd93c00c37adc13

Improvements to make:

• You can easily add a monogram in Onshape like the one in the picture.
• If you want to scale it up, consider making the holes smaller so they are still thumb sized.
• Lower the divider wall so it isn’t visible through the spout.
• I may make a version that attempts to look like a normal teapot, with the secondary compartment being small with the hole in a hidden place. This would be better suited to the assassination use case.