Rotating Skull Gear with snap pins

I've learned that I have a thing for 3D printing geared objects and decided to print CarryTheWhat's Rotating Skull Gears. This is a great mashup between Emmett's gear code and a Skull image by bothacker.

This was actually one of my first prints a couple years back, but my machine was not tuned well and it did not turn well. After having great success with Emmett's new parametric snap pins, I thought that this might benefit from a conversion to the new pin type, so I loaded the files into Tinkercad, plugged the holes and created the new ones that work with the parametric snap pins.

I made one minor mistake when doing the conversion. I used the standard pin size which was just slightly too long for the center piece. I did some testing and found that all I had to do was to cut off the tip of the pins that go into those holes. Long story short, it goes together well and works great! Just add a little of your favorite lubricant. I recommend either silicone spray or white lithium grease.

And again hats off to CarryTheWhat for the great design!