March 17, 2016
Description
Built for the JJRC H6C quad. Motor holes will have to be sanded or filed out, this is to give it a very tight, pressfit for reduced vibration. Hole in the rear of the frame is for a standard 5mm 3v led. I solder it across the positive/negative rail, using a 1k ohm resistor. This makes flying at night a lot easier. Uses original screws for attaching the lower frame. This frame is built for transparent filament, with a series of lightpaths for the led light to disperse into the frame.
License:
Creative Commons - Attribution
JcDenton
