Troublemaker v2 3D PRINTER

Troublemaker v2 3D printer is an improved version of Troublemaker, a derivative from the highly popular open-source 3D printer Ultimaker Original. A DIY friendly open-source release together with a complete kit of assembly parts, CAD files and technical documentation is available also on Github.

---

SPECIFICATIONS:

PRINTING SPECIFICATIONS
Build volume (mm): 300 X 300 X 300
Auto levelling: Optional
Minimal layer height (mm): 0.05
Steps/mm (X & Y): 80
HotEnd: 1 X E3D-V6 1.75 mm (swappable with any E3D)
Travel speed (mm/s): 200
Print speed (mm/s): 150
Heated bed: Yes - 24V or 230V

MECHANICAL SPECIFICATIONS
Desktop size (mm): 460 X 440 X 660
Frame: Plywood
Linear rails: 8 mm ground hardened steel

ELECTRICAL SPECIFICATIONS
Supply Voltage (V AC): 240 or 110
Supply connection: Switched and fused IEC Socket. Lead not provided.
Power supply: 1 X 24V 100W / 1 X 24V 350W (if 24V bed)
Electronics control board: RUMBA + LCD
Motor drivers: 4 X DRV8825 (X,Y,Z,E)
Motors: X: 46 Ncm 1.8° / Y: 46 Ncm 1.8° / Z: 46 Ncm 1.8°

SOFTWARE SPECIFICATIONS
Recommended slicing software: CURA / Slic3r

BUILD TIME
From full-kit: 12h