March 24, 2016
Description
As I'm still using the WanHao plaster on my heated bed, the glass is a little too high for me to use the original glass bed clamps. So I made some modifications to the clamps so that the screws can secure the glass from moving around on the bed.
Also, this remix has a thicker base to possibly reduce any warp? Anyway, I've printed and using the set of 4 clamps on my 3D printer.
The holes are supposed to accommodate M3 screws and M3 nut, but I had to drill with a M3 drill bit in order to have the screws move nicely in the hole.
Anyway, the clamps seems to work nicely. :)
28th March 2016:
Update - If you are printing a long job, this clamp doesn't work as the screws will become loose and the glass will move a bit causing distortions to the thing. Best to switch to the old paper clip or alternative solutions like these:
License:
Creative Commons - Attribution
albertkoey
