Dodecahedron Shadow Lamp

A laser cutted shadow throwing lamp in the shape of a dodecahedron made out of 3mm plywood. The description of the project can be found here https://fablab-wuerzburg.de/projekte/dodekaeder-lampe.

You need to cut only all the "all_parts_X"-dxf files, if you don't want to change the design. For this you need a laser cutter with a working area of minimum 500mm x 300mm.

If you want to redesign some parts, dxf-files of all single parts are also uploaded.
Here is a list of the number of the single parts you have to cut.

• 11x "face.dxf"
• 1x "bottom.dxf"
• 5x "base.dxf"
• 100x "joint_face_face.dxf"
• 20x "joint_face_bottom.dxf"
• 5x "joint_base_base.dxf"
• 1x "lamp_socket.dxf" or modified lamp socket

For the light source a 10W halogen lamp is used. Because lamp sockets differs you have to design your own socket. In "lamp_socket.dxf" is a prototype.
The light source should be as small as possible to obtain a sharp shadow.