April 21, 2016
Description
This is an enclosure for a specific combination of Arduino + Neopixel I thought I would share.
This model will house the following assembly: ( With soldered on header-pins / See photo )
Adafruit Feather HUZZAH with ESP8266 WiFi
https://www.adafruit.com/products/2821
NeoPixel FeatherWing - 4x8 RGB LED
https://www.adafruit.com/products/2945
With these two modules attached, you can build a WiFi Arduino-based LED display board.
Battery pass-through is blocked, USB is available.
License:
Creative Commons - Attribution
seajseven
