New Matter MOD-t Cura and Slic3r settings

Here I share the profiles I'm using to successfully print objects with my New Matter MOD-t firmware ver. 0.15.0, using:

• Cura ver. 15.x (tested with 15.04.3, 15.04.5 and 15.04.6)
• Cura ver. 2.x (tested with 2.5 and 2.6)
• Cura ver. 3.x (tested with 3.03 and 3.1)
• Cura ver. 3.6+ (tested with 4.0 beta)
• Slic3r ver. 1.2.9.

To be noted that with latest firmwares I where not able to complete other than a very small object (frequently not that either...) sliced with Slic3r due to a bug in MOD-t firmware that evaluate wrongly slic3r gcode, generating blobs of extrusion here and there that will make the bed hop on pinion rods.
So slic3r is not encouraged as the firmware will never be improved again... (sigh!)

I'll update these profiles as I experiment and find better values, so here is the reference of last time I've updated them:

• Cura 15.04.x settings: 06 February 2017
• Cura 2.x settings: 07 June 2017
• Cura 3.6+ settings: 19 february 2019
• Slic3r settings: 18 October 2016

If you have improvements, corrections, concerns, whatever you want please write me in comments :)

DISCLAIMER: you'll take all te risk of using these profiles, They are not official as I'm not in any way linked to New Matter. I take no liabilities if something bad happens to your 3D printer, you and only YOU are the responsible of the correct operation of your printer.