A remix of the Pine A64 case by FrankLumien:
http://www.thingiverse.com/thing:1287387
Version 5 available.
I eliminated the Pine A64 logo and added generic slots instead.
Use M3x25mm screws (something like [these](http://www.mcmaster.com/#93395a216/=12a4kal) ).
I added an option to have VESA mounting holes on the bottom half to mount the enclosure on the back of a standard 100x100mm or 100x75mm monitor mount.
For ease of assembly, rebore the long holes on the TOP part with a 3.5mm or 4mm bit (9/64" or 5/32"), they might shrink during print.
aaalberto7
