May 12, 2016
Description
Designed to mount on a Parallax Standard Servo (900-00005) or Continuous Servo (900-00008 which is the same as Futaba S148 with a 4-arm Horn.
Connecting 3D printed parts to servos is challenging. Here are two parts which sandwich the servo horn to make a pulley as well as an axle for a square shaft (1/8"x1/8"). One part goes below the horn. The horn is screwed into the servo like normal. Then the other part is screwed into the first with four #4 screws/nuts.
You will want to customize the parts to fit your unique needs (e.g. gear teeth).
License:
Creative Commons - Attribution
bobrumer
