Parametric Peristaltic Pump with Mount

**** UPDATED INFORMATION 29/08/2016 ****
Ok I've added some pictures of printed version for tt motor... :( not only good news...

Drmn4ea warn in is description that this pump need a lot of torque... he's right... my plan was to use tt motor which are plastic gear motor... the problem was the size of the tube that I have selected... way too big (10 mm od 8mm id silicon tubing) ... I was on my way to build a bar tender robot for my wedding ... but with a month of delivery time for my fda silicone tubing... ordering the wrong size made me miss my time window... but don't worry this project is not dead... it remains me a lot of future party to justify the effort over this one ;)

I also see some user having difficulty with tube seal... the key factor of this is the tolerance value...

**** UPDATED on 6/10/2016 ****

Compact: mount hole distance =0.75*OD

**** UPDATED on 5/30/2016 ****

New Feature : 28BYJ-48 motor Mount!

Parametric 28BYJ-48 motor Mount could now be generated by setting Motormount_type=2.

Don't forget to set (you should add some tolerance to those number) :
CenterHole_dia = 5
CenterHole_Num_of_Flat = 2
CenterHole_Flat_dia = 3

I didn't test it at the moment but all dimension are based on the 28BYJ-48 motor spec so it should be correct. It support Both type of Pump mount.

The gap between the mount and the pump is set to 5mm...

Enjoy!

**** UPDATED on 5/25/2016 ****

New Feature : TT motor Mount!

Parametric TT motor Mount could now be generated by setting Motormount_type=1.

I didn't test it at the moment but all dimension are based on the tt motor spec so it should be correct. It now support Both type of Pump mount.

Enjoy!

**** UPDATED on 5/20/2016 ****

I've just add parametric center hole type, with default set to arduino yellow tt motor (circle with two flat...the one that i want to use for my project... for generating the original center simply set: CenterHole_Dia=0 CenterHole_Num_of_Flat=6 CenterHole_Flat_Dia=5.5

the STL remain with the original center screwdriver hex hole.

It now support motor shaft with 1 to 8 flat or round one (next step would add round shaft lock screw...)

Also I want to add an parametric motor mount for this pump...

**** Original Post ****

I was in the need of a mount bracket for the impressive Drmn4ea's Parametric Peristaltic Pump. So I've Add two model of mounting bracket to the scad file (Compact and Standard).

Standard: mount hole distance =1.25*OD

Those mount are optional, so you could disable them using variable.

I also add a quick fix to the Outer Diameter Calculation, So now the resulting OuterDiameter is not oversized.

Hope it would be useful :)

This thing could be customized using the Customizer App, but please note that a strange display glitch append when the tubing_squish_ratio is < 0.41 ... this glitch didn't appear in openscad...

Designed Using Freecad first and ported to OpenScad.