VDQ250 Antenna Mount

This is a dual antenna mount for a Voodoo Quads VDQ250 designed for use with antenna tubes Ø3.3 mm. Nominal hole diameter is Ø3.6 mm, in case the printed holes come out smaller (they do with my printer, about 0.2-0.3 mm). If they are too large, you can make a fit with shrink tubing. There is an inside ledge to keep the antenna tubes from being pushed through. Strap the mount down on the top plate with two zipties.

There are three versions for different slots/openings in the VDQ250 top plate, depending on where you mount your receiver.

I appreciate any comments and suggestions for modifications.