Featured on
MyMiniFactory!
Also see
The HIVE - Stackable Hex Drawers
The HIVE is a fully stackable version of these modular hex drawers
This is an extension of my
Modular Wine Rack.
I noticed my wine rack could also make great stackable drawers.
The hex modules are 75 mm long and 75 mm wide.
- - -
#####More Modular Drawer Systems
- [The HIVE - Stackable Hex Drawers](https://www.thingiverse.com/thing:1743145) (Interlocking)
- [Modular Drawers 2.0](https://www.thingiverse.com/thing:2539830) (Interlocking)
- [Modular Drawers 1.0](https://www.thingiverse.com/thing:1716141) (Stackable)
- [Economical Drawers](https://www.thingiverse.com/thing:1750692) (Not modular)
#####Find me on:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|------|
- - -
Update 2/19/2017
I removed the stacking piece because it is a waste of filament compared to my HIVE drawers which interlock. If you need to stack in a honeycomb pattern I recommend you print the HIVE drawers instead.
Update 06/07/2016
Later in the day I uploaded the module with a back and the drawer with a separator.
Update 06/08/2016
I uploaded both the voronoi module and the voronoi module with a back. I also uploaded dual modules.
Update 06/09/2016
I uploaded the voronoi dual modules and the dual modules with a back.
Update 06/15/2016
I uploaded the module stacker. This addition makes for easier stacking.
Update 08/2/2016
I uploaded the wall mounting module with the tab. The tab is reversible so that the module can be mounted from the inside or the outside. I made a special module for mounting with tabs on the inside. It is 3mm taller than the others. I also included another drawer.
Update 09/13/2016
I uploaded a larger module and drawer. 100 mm in height and width.
O3D
