June 8, 2016
Description
This gimbal is a part of project i have been working on at school. the gimbal is designed by me and my fellow students (group of 4). and we have worked with the mechanics, eletronics and the software.
we put a GoPro on it because we would be sure that we could use it for test, as we didnt have time to play around to fit a DSLR on it
The Gimbal could benefit from some minor modifications. here by bigger motors for Yaw and Roll. but also general strength.
Parts list:
Turnigy_HD_5208
http://www.hobbyking.com/hobbyking/store/__45369__Turnigy_HD_5208_Brushless_Gimbal_Motor_BLDC_.html
12mm aluminium tube
16mm aluminium tube
2,5 mm bolts
3 mm bolts
5mm bolts and nuts
3mm aluminium plate
2 IMU's
Gimbal controller (We developed our own, if you would be interested in this write me.) otherwise it can probably be adapted to any other controller on the marked.
LIPo og likewise (we used a LiFePo4 battery because our school wont allow the use of LiPo's
License:
Creative Commons - Attribution - Non-Commercial
Nickk1997
