July 29, 2016
Description
This is a Conversion Kit for the Yellow TT Motors off of ebay - is for connecting to Meccano and Lego Parts. This allows the user to easily create Motorized Cars, Vehicles; Remote Control Automotans; and automated Robots - etc.
The Kit assumes usage of my already designed Meccano Parts - from here or other of my Meccano Parts Pages.
The Conversion Parts specifically are the Gears and Wheels - with the Moon-Cut Circle to plug onto the Motor. These have Holes compatible with Lego 16-tooth Gears and the Lego X-Axles. There are alternate Dual Holes to screw onto Meccano Rods.
The Conversion Parts:
These Parts are under Planar and Extended Axle Forms.
Also are the Front and Back Motor-Mount Parts that act as sleeves to place over the ends of the specific Motors listed above. Meccano Parts can then be screw mounted on them for projects.
Additionally are added: two Axles. One Axle/Motor is to match the Motor Beveled axle - to allow adding of free rolling Wheels without the use of a Motor. Second Axle/Peg is meant to be cut into pieces - and act as a Parts Connector without the use of Screws or Bolts. Note, to use the Wheels Axle - the user will need to drill a larger Hole into the Wheel Axle Part.
Screws 1/2inch #4 or #6 are also needed - else M2 or M3 Bolts.
Some simple example projects are pictured that my daughter built: a Dragster, and a Walking Duck. They are automated by wiring the Motors to old toy truck Remote Controllers. And yes, the Duck walks - by rotating Legs , pretty well actually - that which my daughter built.
Have Fun !
If you build this, then deffinately refer to Meccano Base Parts Plates Struts Angles - for additional parts.
License:
Creative Commons - Attribution - Non-Commercial
jlsilicon
