Summary

This is the model to print the base needed to light up the Championship Thresh figure as seen on my blog. Here is the Instructables guide. I made a video of the result too.
If you print it don't forget to hit the "I made one" button!

Print Settings

Printer Brand:

RepRap

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Prusa i3 R2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.4mm nozzle, 0.14 layer height</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>It was designed so that it does not need supports. If you have trouble printing the tube holding the led (for example if the led doesn't fit) try changing your perimeter width or faking your nozzle size setting on the slicing software, or use a hairdryer to soften the plastic and push the led inside.</p></div>

Base for a glowing Thresh figure

Base for a glowing Thresh figure

Related Models