RMRC Goby 180 & 210 Pod

Alex from ReadyMadeRC here. We were considering for a long time making a pod for the Goby line of frames and this is what we came up with. After lots of testing, this design proved to be pretty strong and very functional. The RMRC Cricket will mount right on the back with the SMA sticking up through the protection ring. If you like, you can run an extension from the cricket to one of the sides and mount your antenna off to one side.
There are holes for zip ties to mount your antennas to.
This was intended to be used with the CNC aluminum Hellbender camera ring, but since many of you may not have that, it is included here for you to print if you want.

I would recommend using as long of m3 screws as you have to thread up into the pod.

The mounting holes for this pod are the same ones that are for the battery plate, so you may not be able to use the battery plate with this pod.

The HD cam brackets you see in the pictures are also included

Enjoy!