#OpenRC 2WD Micro Crawlers
- Length : 72mm (without body)
- Width : 47mm
- Weight : 34g (without body and without lipo)
3Dprint parts list :
Central chassis
- 1x Chassis.stl
- 1x Couvercle Chassis.stl
Rear deck
- 1x Pont AR GA.stl
- 1x Pont AR DR.stl
- 1x Pignon moteur.stl
- 1x Pignon roues.stl
Font deck
- 1x Pont AV.stl
- 1x Support triangle AV.stl
Rear suspension
- 1x Triangle AR bas.stl
- 2x Trangle AR sup 2x.stl
Font left suspension
- 1x Triangle AV BAS GA.stl
- 1x Triangle AV HAUT GA.stl
- 1x Fusee GA.stl
- 1x Support Fusee GA.stl
Font right suspension
- 1x mirror of Triangle AV BAS GA.stl
- 1x mirror of Triangle AV HAUT GA.stl
- 1x mirror of Fusee GA.stl
- 1x mirror of Support Fusee GA.stl
Direction
- 1x Direction servo.stl
- 1x Direction fusee GA.stl
- 1x mirror of Direction fusee GA.stl
Wheels
- 4x pneu 4x.stl in flexible filament like nijaflex
- 2x roue AR 2x.stl
- 2x roue AV 2x.stl
Other parts :
- 1x ESC and receiver examples : https://gitlab.com/openBLERCremote/redbearblenano_receiver_with_brushed_esc_arduino_ide. Updated September 27, 2016: I ordered a esp-32 and a motor driver TB6612FNG, I think current November 2016 I propose a less expensive and easier to manufacture ESC.
- 1x gearbox motor N20 DC3V 1000RPM
- 1x ultra micro servo (HK-5330)
- 2x screw M2x8 (font wheels axis)
- 6x ball bearing 2x5x2.5
- 1x screws kit for Losi micro-T (ref LOSB1524)
- 1x lipo 1S 260mA (size ~35x21x8.5)
- 39mm silver steel ground rod round shaft 2mm (rear wheel axis)
- 6x sewing pins (suspension axis and steering arm
- Steel spring for font and read springs ("Fiber" of a brake cable, floppy spring)
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
JonasF
