Watertight box, closed by four screws.
here I leave the first waterproof ESC box for my boat FT011
To better protect the electronics of the receiver and ESC from my boat.
The model is without holes, so for different combinations of wiring. It is very easy to make new holes with a drill, then top it all off with silicone. In this way I hope this enough salt water further from the plate.
After passing all cables, be sealed with silicone everything and let dry. once you have done that, the box will be fully waterproof and you can go to salt water a bit more secure..
One trick: put inside a bag of these coming in the shoes to absorb moisture. It sure helps.
here is a litle video of how to remove the parts for the install of the waterproof bon on the FT011
https://www.youtube.com/watch?v=eu0hKZMamUQ
if you want more information & more 3D parts about the boat FeiLun model FT011 follow this links:
http://bit.ly/2aD26Qd
http://bit.ly/2bm0Z96
if you liked this thing, please follow me on thingiverse :)
if you want to see more videos have a look to my youtube channel
http://bit.ly/SongoLand
PLEASE! do not use this or any other mine contribution to make money.
They are shared to enhance DIY.
Thank you
If this thing was helpful or you like the designs, please click the "like" button. in that way I will continue sharing more things.
If you print one I would love to see it in the section "i made one"
of course, all views and advice are welcomed, you can always improve design..
thanks for watching
_sOnGoKu_
