Yet Another AA to C Battery Adapter

This simple project provides an battery adapter that allows using AA size cells in appliances made for C size cells.

The construction consists of two thin cylinder which are not entirely close but joined by two tight turns which form a small gap. The construction is inherently flexible forming a kind of spring that encloses the AA cell. On top and bottom the outer cylinder is chamfered, whereas the inner cylinder is chamfered only on the top and has a brim on the bottom, so that the inserted battery cannot slip out.

To insert and release the battery, it is easiest to slightly spread the gap with the two thumbs, so that the cylinders get widened, so that the battery cell easily slides in or out.

Given the springy nature of the sabot, the material of choice for printing is ABS.

The OpenScad source for this project is based on the snakeline approach, a library which makes extensive use of OpenScad's child concept. Each curve is coded as a single statement where each subsequent child adds another segment starting at the point and direction the last segment ended. The SCAD source is as always fully parametrized and could easily be adapted for other sizes, if ever the need for this arises.