Glass Bed Clip (Screwless)

PLEASE NOTE: I have received reports of these clips failing when printed in PETG. It appears they have a bit too much flex in that material. I would recommend printing these in ABS or another stiffer hi-temp material.

---

Update 2/21/2017: Added a longer version of the clip for users with a larger gap between the edge of the glass and the heated bed, or for users who just want a little more surface area for better holding power.

---

Simple clips to hold a glass bed securely in place. Designed to be discreet and not require any additional hardware. The glass I use is 2mm thick but the springy nature of these clips mean they should work for thicker sheets, as well. Prints quickly with no support.