Motorcycle RokForm iPhone6s+ Holder

Basically I got the iPhone6S + but I didn't want to get another RokForm case.So I used the locking and magnetic bit from the older case for the iPhone6s, which is modular and comes apart.
I made a cradle basically with a tab at one end to prevent the thing from sliding out, and it works very well indeed. Even clears my tank bag when I have a cable charging my phone. Its slides and snaps really well into the holder.
Its made of 2 portions that sandwich the RokForm adapter. I glued the cap portion in place since I wont be using the RokForm adapter any longer. You don't have to do that since the phone on its own will keeps everything tight during use. But if you don't, it can all come apart when taking the phone out.
Print the holder standing up, which will minimize the warping and support material used. I also printed it on fine resolution since its going on the bike.
The cap can be printed flat and is slightly thinner than required just in case some RokForm adapters are a bit thicker. this doesn't matter especially if you glue them together.