Openbeam Printer

Version 2 parts have been uploaded weee

This Open Beam 3d printer is inspired from the ultimaker/corecube/Ingentis
All items have been modeled and printed,
items you will need apart from lots of plastic
Z axis
2x sfu1204 ballscrews
4x 480mm 12mm Smooth Rod
8x lm12uu bearings
6x 608zz ballbearings
1x gt2 1220mm closed belt
2x gt2 pulleys 36tooth 8mm dia http://www.robotdigg.com/product/66/2gt-pulley-36-teeth-8mm-bore
1x gt2 pulley 16tooth 5mm dia http://www.robotdigg.com/product/59/Rostock-16-Teeth-5mm-Bore-GT2-Pulley
XY axis
4x 500mm 8mm smooth rods, you will need to cut to length
2x 450mm 6mm smooth rods, you will need to cut to length
2x lm6luu bearings
sauntered bronze or teflon bushes for the 8mm rods
1x hotend mount like http://www.thingiverse.com/thing:94678
8x 608zz bearings
8x gt2 20tooth 8mm dia pulleys http://www.robotdigg.com/product/23/GT2-Pulley-20-Teeth-8mm-Bore
lots of gt2 belt
feet
4x rubber feet
Additional
4x rattm 78oz steppers
2x Flexible Coupling 5mm Shaft to 8mm Screw
10x 1mtr openbeam Yes I know excessive

Also I am using a 300mmx300mm silicon adhesive heatpad
I hope you enjoy my design
https://www.youtube.com/watch?v=AUOYJMHpzPw