Plantronics 855 Bluetooth Case

I own a Plantronics 855 Bluetooth headset (http://www.plantronics.com/au/product/voyager-855) and it's one of my favourite bluetooth headsets as it's got an extendible microphone boom and it can play stereo music with AVRCP and A2DP profiles...

I also have a Plantronics Voyager Legend bluetooth and that came with a protective case, which I wish I had with the 855, because the main thing stopping me from using the 855 more often is how fragile the whole thing sits, the stereo earbud is hanging by a wire and the ear clip is easily breakable. so I took the Legend's protective case idea and designed a contoured case for my 855 too - and here it is!

This is actually version 2 - In the first version the lid clipped on very snug & tight so you couldn't get your fingers into the gap to open the lid. Also it needed a lot of attention otherwise the earbud cable is gonna get pinched by the lid. in V2 I've added a a recessed compartment to put the cable (as pictured) and deliberately raised the lip by a mm so it would create a seam between the lid and case so you can open the lid with your fingernails.

The STL file as is is designed for the 855 being used normally on the right ear. For lefties, just mirror-image the entire STL file before printing, the dimensions are symetrical.

Anyone with an 855 or looking for a good bluetooth headset, feel free to download+print this. If it's been useful to you please drop a like. Thanks! :)

If you found this useful, please Buy me a coffee at https://www.buymeacoffee.com/theStan. Optional of course but kindness makes the world a better place :). Thanks, Enjoy!