Sennheiser EW 100 ENG beltpack bracket

Improved replacement or additional baseplate for Sennheiser EW100 beltpack receiver/transmitter. This baseplate is similar to the Sennheiser EW100 quick release plate. See the differences and similarities in the pictures: The left one is an original genuine Sennheiser bracket and the right one is a 3D printed redesigned clipon as to be found in the download section.

http://en-us.sennheiser.com/wireless-clip-on-lavalier-microphone-set-presentation-ew-100-eng-g3

To be printed with 25% fill, 3 shells, 0,1mm filament layer height, without raft or supports. Custom holes can be drilled if you print this with 100% fill. More versions of this bracket will be uploaded later.