Hlidskjalf (Odin's Chair)

"Hlidskjalf" is my dual CoreXY, extremely expensive 3D printer.
"CoreXYU" coined by dc42 on the RepRap forums.
http://forums.reprap.org/read.php?397,737863

https://www.youtube.com/watch?v=mMRnG_n2i84

Extruders are done: http://www.thingiverse.com/make:258333

Build volume covered by both heads: 13.37" square x 15.75" High, or 34 sq x 40cm Tall.

Left print head: "Hugin", E3d-v6 300c 24V hot end with Toranado extruder.
Right print head: "Munin", Prometheus v2 300c 24V hot end with Toranado extruder.

Electronics:
RADDS v1.5 board with 2x driver extension and 8x RAPS128 stepper drivers
6x NEMA17's 76oz-in for axis, 2x NEMA 14's 15.6oz-in 0.9deg for extruders
Arduino Due r3 microcontroller with 7" Panel Due touch screen
RepRap 24V PCB Heatbed 300mm x 300mm
TDK-LAMBDA FPS1000-24P 1000W PSU

Hardware:
2x RM1605 x 550mm ballscrews with anti-backlash nuts and FF12/FK12 end supports
8x MGN x 500mm linear guides with12x MGN12H guide blocks
Misumi USA aluminum extrusions

Odin, give me the strength to finish this project, because I've already spent my wealth!