Blown Wades Extruder v2.4

Wades get a blowjob... no no no, I mean...

11/8/2013: This is the latest rendition of the famous Wades Extruder.
Based on my earlier Blown Wades (# 129432) I moved the Fan out from under the Stepper for more volume. I left a little opening for cooling the stepper, but most of the air will now be directed to the nozzle.This uses a 40mm fan to blow air directly down to the hot end,
cooling both the print and the Extruder stepper at the same time.

This works with both my modded Skuehling X carriage and my modded Budaschnozzle
X carriage.

Any Wades Idler will work, but I prefer the included Skuehling Guidler

I tried to keep this Extruder in the original Wades footprint so we wouldn't lose any X print
area.

See my other things for the modified Skuehling X carriage to mount the Extruder. (Thing#: 129944 included.)
This is currently setup for a Groove Mount 1.75mm hot end. I will make mods for Jhead and others if you tell me the dimensions. It's easy to drill it out for 3mm filament.
This is intended for you to use the Skuehling Guidler (included).
This also uses the Herringbone Gears (included)
The GroovemountBase is a template for carving your own wooden isolator with either laser, or hand tools. I find Home Depot paint sticks work well. I did not design the Herringbone
gears nor the Guidler.