Tiny Wallet

Minimal wallet for the card-carrying consumer. Can be printed in both flexible and stiffer materials. ABS, PLA, PETG, TPE, NinjaFlex, Wood (as in the photos) should all work fine.

Holds 4 easily accessible cards, and has a recessed middle slots for emergency cash or up to 2 extra cards.

Based on the FlexWallet Mini, but have some additional improvements:

• Bottom indent to quickly push up the card you want to use. Also makes it easier to access the middle slot.
• Better card fit.
• Rounded edges which feels MUCH better in the pocket.
• Thicker outer walls for stronger print.

The wallet is designed to always have all 4 main slots occupied, as thís will give the tension needed to keep them all snug in place. Fewer cards will still work, but they might fall out easier.

UPDATE 2016-10-17 - V13
For people having problems printing tall single-perimeter walls I've also made a version with thicker inner walls (1.0 vs 0.4mm). This will increase the total thickness with 3mm, but will be easier to print. It also has a thicker bottom to give it more material if sanding the edges.