Tevo Black Widow - Modular X Carriage

##Modular Carriage for TEVO Black Widow

Note : Do not hesitate to leave me a little tip if you like the design. That helps me to pay the filament I waste when I print prototypes.

Description

This is a modular carriage for the TEVO Black Widow. The motherplate is fixed directly on the CNC X-carriage. Then you can add daughter-plates depending on your setup.

Note for TitanExtruder daughter plate : I didn't find a good way to leave the tension bolt cleared. But as the daughter plate is easy removable, I manage a hole to access that tension bolt.

Note : This modular carriage is also compatible with my fanduct : http://www.thingiverse.com/thing:1953697

Offsets for Sensors

I've designed the sensor mounts so they've all got the same coordinates.

• Plate for Tevo Tarantula hotend or E3Dv6 : X: -40 ; Y: +10
• Plate for Titan+E3Dv6 direct extruder : X: -40 ; Y: +16
• Plate for Dual E3Dv6 : X1: -40 ; X2 : -65 ; Y +10

Additional hardware

(under construction)

• 3 flat head M5 screws (the ones delivered with the Black Widow
• 3 M5 nylon-lock nuts
• a bunch of M3 nuts
• a bunch of M3 bolts

###Revisions :
*2017-04-23 :
- Corrected : Tarantula stock hotend plate.

*2017-04-18 :
- Corrected : Titan Aero (hole for thumb screw). Dirty way to correct but I didn't want the extruder have too much hangover on the plate.
*2017-04-14 :
- Added Titan Aero
- Added Support for LJx12 Sensor family

• 2017-04-08 :
  - v1.9.1 Release for E3Dv6. It is now compatible with either genuine or clones.
  - v1.8 : Genuine Chimera + Cyclop plate added
  - v1.9 Release for Tarantula : stronger
• 2017-03-05 : v1.8 Release
  - Dual E3Dv6
  - Laser Cutter mount
• 2016-10-15 : v1.6 Release
  - Motherplate design
  - Daughter plates design
• 2016-10-12 : First release
  - Abandonned