LED Bridge Lamp HUE mods

In spite of the fact that they're stoooopid expensive, I decided to use Hue Lightstrips (2nd generation) in my LED Bridge Lamp, so I modified a few parts from Opossums' stellar design to facilitate that. Here's what's included:

• light_guide_AB-hue
  The two-part (A and B) light guide, modified to support a single LED strip up to ~15mm in width. Hue lightstrips are ~14.5mm wide.
• light_guide_straight-hue
  The single piece light guide used for the [optional] bridge straight sections. Same modification as above.
• assembly_jig-hue
  The handy assembly jig modified to accommodate the light guide changes above. I also gave it a flat edge so the sections will easily remain upright while glue dries (see photo) - this simplified the assembly process for me.

Thought it might be useful to share these for anyone else who plans to use Hue Lightstrips (or any other single LED strip less than ~15mm wide) in their LED Bridge Lamp.

UPDATE: You can see the details of my make of the bridge lamp here: http://www.thingiverse.com/make:275750