November 26, 2013
Description
This is a simple 3D printed platter to hold the Adafruit Trinket, a power jack, and a wire strain relief. The STL file as well as the OpenSCAD source are available.
Although this design has a 90-degree corner, that corner has a lot of strain-relief. The outside edges have quarter-circles. The inside corner edge is rounded, not sharp.
More information at the blog post: http://netninja.com/2013/11/16/introducing-the-trinket-platter/
OpenSCAD source is committed to the GitHub project page: https://github.com/BrianEnigma/trinket-platter
License:
Creative Commons - Attribution
BrianEnigma
