Yamato Battle ship model cut into 2

This is a design posted by "tonysheng321". I cut the design into two and took off the bottom which was difficult to print without support. Now, you don't need support and you just need to glue the two parts together. Enjoy!
Please note:
I have noticed some gaps in the model, so i have used Netfabb to repair some of the gaps to have a better print quality. The repair will prevent the control tower in the ship model from collapsing. See the the photos.
I have a very small build plate (120 mm x 120 mm) and a small nozzle too (0.35 mm), that's why some of the details were automatically omitted by Cura. You might have a better luck to have more details showing if you can print on a larger plate. The red model in the photos is : 200 mm in length.
03rd March 2017: I have uploaded a cut for the entire upper half of the ship for those who has a wide build plate.