Micro Hexcopter Frame

This is a micro FPV Hexacopter Frame design that I've been working on for use with 8520 coreless motors. The idea is to get a little more lift when carrying the 750 mah 1s batteries that I'm using over what the standard quad setup seems to be able to provide. It comes out at about 16 grams +/- for the printed frame.

I've added in some tolerance for printing with ABS to take account of the shrinkage when printing. You may need to modify sizing slightly to suit the material you're printing with to suit the motors - mine shrinks by 1mm across the diameter of the motors so the file is sized accordingly.