Enclosure - Raspberry Pi 3b with 4 channel relay board

This is an enclosure for a Raspberry Pi model 3B and 4 channel relay board. It includes 4 standard US plug sockets, Off switch, and a standard computer cord socket. This was created to cleanup my setup. Currently using OctoPi to control my Monoprice Maker Select IIIP. I am using the relay board to turn on/off the printer as well as the lights through the octopi interface. Instructions included by JeffeB3 here: http://www.thingiverse.com/thing:1428478

Since I do not often need access to the Pi, I decided to stack the relay board on top of it. This reduced the space requirements but you will need to remember to plug in your gpio pin jumpers before installing the relay board on top of it. Enclosure was designed to use parts I already had on hand for another project. The rocker switch is only rated for 10amps so be sure not to plug any high powered devices into the outlets. I am currently only using 2 of the 4 channels on the board.

Parts List:
1x Raspberry Pi Model 2 or 3B
1 x SainSmart 4-Channel Relay Module: https://www.amazon.com/gp/product/B0057OC5O8/ref=oh_aui_detailpage_o00_s02?ie=UTF8&psc=1
1 x Enclosure Bottom Stacked
1 x Enclosure Top Stacked w/Supports
2 x Board Spacer
1 x Board Spacer2
1 x DigiKey Q212-ND: http://www.digikey.com/product-detail/en/qualtek/703W-00-04/Q212-ND/245553
4 x DigiKey Q227-ND: http://www.digikey.com/product-detail/en/qualtek/738W-X2-03/Q227-ND/245568
1 x DigiKey RA11131100-ND: http://www.digikey.com/product-search/en?keywords=RA11131100-ND
2 x 3mm x 25mm hex head cap screws
4 x 3mm x 8mm hex head cap screws
16 guage wire.