HC-SR04 Sonar mount for micro servo

This is a sonar mount to hold the HC-SR04 sonar on a micro servo.

This is a bracket designed to hold the HC-SR04 Ultrasonic Distance Module or similar sonar module, and allow it to be mounted to a micro servo motor with it's horn mounted to a flat surface. (Note: this holds the module with the connection lead pins facing up, you could replace the L shaped lead pins with straight pins if desired) This should hold the module via a friction fit, however you can also use a small bit of foam mounting tape for a better hold. I have tried this out on a couple of different HC-SR04 modules and found that the tolerances in the component placement on the modules are not very tight, so I have included the .scad file if you need to make any modifications.

Please let me know if you found this useful.

Use this one if you want to mount on the servo horn http://www.thingiverse.com/thing:42499