60, 80, 120 mm fan cover/duct with 90 degree deflector

This is a general purpose fan duct that can be used with any 60mm fan (with 50mm mounting hole spacing). The fan is designed to redirect the air flow at a 90 degree angle.

If you find this helpful and would like to donate a smaller amount than the minimum thingiverse tip, please download a thank-you token for a very small fee. https://cults3d.com/en/3d-model/art/jimb15122-thank-you-token

Thank You!

1/2/2017 - By request, I added an 80mm version also. Scaling up the 60 to 80 is not an option, because hole spacing changes by a different ratio.

8/18/2017 - Added 120mm, and 120mm Slim (3/4 height) versions.\

8/23/2017 - Corrected the hole spacing on the 80mm version. Now is 72mm, was 68. (center to center)

I designed this specifically to improve my anet a8 printer. When mounted in conjunction with a 40mm board cover (http://www.thingiverse.com/thing:1803120) and a fan size adapter (60to40.stl - http://www.thingiverse.com/thing:21112), the single 60mm fan will cool BOTH the main board AND the x axis motor. See photo.

Please check out my new product: The "OFFi" Auto-off switch for ANET A8 at: http://www.ebay.com/sch/i.html?_nkw=jimb15122