Tiny Whoop Brushless

Brushless Tiny Whoop

Duct for each motor printed as separate part, so if you break one you don't have to print entire frame.

Print each part twice and put everything together like this:
https://www.youtube.com/watch?v=ICViKRukXuo

Designed for following parts:

Motors: Racerstar 1103 8000kv/10000kv
Propeller: DYS 2030
Flight controller: Pico BLX (20mm x 20mm mounting holes)
ESC: 4in1 racerstar 6A (20mm x 20mm)
Battery: 2s

Finished product should look like this:
https://www.youtube.com/watch?v=j3msxzyWhr4

3d printed:
https://www.youtube.com/watch?v=rPKuajP53lA

---

Added 3-inch version (77.5mm inner diameter)

Haven’t printed it yet so I don’t know if it is sturdy enough.

• Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
• Angled struts
• Slots for motor wires. Braking duct doesn’t require disordering

---

Added 40mm version (41mm inner diameter)

Haven’t printed it yet so I don’t know if it is sturdy enough.

• Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
• Angled struts
• Slots for motor wires. Braking duct doesn’t require disordering

---

Added 50mm version2 (48mm inner diameter)

Haven’t printed it yet so I don’t know if it is sturdy enough.

• Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
• Angled struts
• Slots for motor wires. Braking duct doesn’t require disordering

---

Added 3-inch full FC version (77.5mm inner diameter)

Haven’t printed it yet so I don’t know if it is sturdy enough.

• Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
• Angled struts
• Slots for motor wires. Braking duct doesn’t require disordering
• 30x30mm FC mounting holes

---

Added 53mm version (53mm inner diameter)

Turns out that DYS 2030 propeller is 53mm in diameter (and not 47mm as stated on Banggood site). So new version was in order...

• Duct wall is 0.8mm tick – two layers if using 0.4mm nozzle
• Angled struts
• Slots for motor wires. Braking duct doesn’t require disordering
• Recommended props DYS 2030

---

RCgroups thread - https://www.rcgroups.com/forums/showthread.php?2815221-Snapy-brushless-Tiny-Whoop