Filastruder 2.0 - Extruder/Motor Mount

The Filastruder Motor Mount for the 2.0

Made not to break copyright, or upset people, or whatever your thinking, simply there so if mine breaks, I have a reference, and for all those who want it as a reference.

Details.

Assume Face 1 is the motor Face (30mm Hole) Face 2 is the Flange Face (15mm Hole)

Datum is the Lower edge that has the 8mm hole in it (Both Sides)

Aluminium is 102mm Square, with 4mm Walls

102x102x77mm

Face 1

a) 30mm Hole Centred 44mm from Datum

b) Screw Set (4x 5mm Holes)
a) Lower 26mm Up from Datum, 6mm Over from Left Side, 26mm Up 66mm from Left
b) Upper, Centered in Line with Lower Set, 86mm Up from Datum

c) 8mm Hole, Centered, 10mm Up from Datum

Center Hole is 30mm
Four Mount Screws are 5mm
Lower Hole is 8mm

Face 2

a) 15mm Hole is Centred, 52mm Up from Datum

b) 7mm Flange Holes First Set, Centered in Middle Line (Vertical) 28mm Up and 84mm Up, Second Set Horizontal Up 55mm, First from Left is 8mm Second is 61mm

c) 8mm Hole Centered, 10mm Up from Datum

Center Hole is 15mm
Four Mount Screws are 7mm
Lower Hole is 8mm

Again for My own use, not designed for commercial replication or use, or design, not here to steal peoples ideas... etc etc etc etc.